12-Input, 9-Output Video Switch Matrix With Output Drivers, Input Clamp,and Bias Circuitry Integrated Circuit IC
The SGM6501 is a video switch matrix which features12 input channels and 9 output channels. Thearchitecture allows any of the 12 inputs to be routed toany of the 9 outputs, and it supports one input to oneoutput or one input to more outputs switching. Therouting map is configured by I2C-compatible serialinterface.The SGM6501 has the input clamp function and biascircuitry, the input clamp or bias mode is selectablethrough I2C interface. Integrated clamp is supported byeach input. The function is to set video output synclevel to approximately 600mV. If sync signal (Chroma,Pb, Pr) is absent, the input is biased by approximately1.3V, which is the center of input voltage range.The SGM6501 is available in Green SSOP-28 andTSSOP-28 packages. It operates over an ambienttemperature range of -40℃ to +85℃.
Key Features
● Single-Supply Voltage Range: 3.1V to 5.5V
● 12 × 9 Crosspoint Switch Matrix
● Supports Standard Definition (SD), ProgressiveScan (PS), and High Definition (HD) Video
● -3dB Bandwidth: 84MHz
● Low Crosstalk: -74dB at 1MHz
● Programmable Gain Options:6dB, 7dB, 8dB, or 9dB
● Input Bias Circuitry and Input Clamp Function
● Supports I2C Serial Interface
● Double-Load 75Ω Output Drivers
● AC- or DC-Coupled Inputs and Outputs
● Available in Green SSOP-28 and TSSOP-28Packages
Applications
Security and Surveillance
TV and HDTV
Automotive Entertainment System
Media Centers
Video Routing
Cable and Satellite Set-Top Boxes
Pin Configurations & Pin Description
Product Selection Guide
| Part Number | Type | Vcc (V) | | | | | | | | | | Features |
| SGM6501 | 12×9 | 3.1~5.5 | 84 | I2C |
|
|
|
| -74 |
| SSOP-28,TSSOP-28 | 12×9, Buffered |
| SGM6502 | 8×6 | 3.1~5.5 | 88 | I2C |
|
|
|
| -77 |
| TSSOP-24 | 8×6, Buffered |
| SGM6503 |
| 1.8~5.5 | 400 | I/O |
| 3.5/0.45 | 12/185 |
| -80 | 3*80 | TQFN-3×3-20L | SIM I/F Swap |
| SGM6504 | (2:2)×4 | 1.8~5.5 | 400 | I/O | 12 | 3.5 | 12 |
| -80 | 2.5 | TQFN-3×3-20L | 4-2:2, Passive Swap |
| SGM6505 | (1:2)×6 | 2~5 | 450 | I/O | 8.5 | 4.5 | 15 | 4/9 | -55 | 1.2 | TSSOP-24,TQFN-4×4-24L | Six Channels 1:2 Multiplexer |
| SGM6510 | 16×4 | 2.7~5.5 | 120 | I2C | 30 | 8 | 40 |
| -110 | 7 | TSSOP-28,TQFN-4×4-28L | 16×4, Passive |
| SGM6511 | 16×8 | 2.7~5.5 | 120 | I2C | 30 | 8 | 50 |
| -110 | 7 | TQFN-5×5-32L,LQFP-7×7-32L | 16×8, Passive |
| SGM6512 | 1:16 | 3.3~13.2 | 80 | I/O | 24 | 12 | 75 | 8/70 | -70 | 25 | TQFN-5×5-32L,TSSOP-28 | 1:16, Multiplexer |
| SGM6513 | (1:8)×2 | 3.3~13.2 | 135 | I/O | 24 | 12 | 50 | 8/36 | -70 | 25 | TQFN-5×5-32L,TSSOP-28 | Dual 1:8, Multiplexer |
| SGM6514 | 16×8 | 2.7~5.5 | 250 | I2C | 30 | 8 | 50 |
| -110 | 7 | LQFP-7×7-32L | High Speed, 16×8, Passive, I 2C Interface |
| SGM6515 | 1:8 | 3.3~13.2 | 80 | I/O | 24 | 12 | 75 | 8/70 | -70 | 25 | TSSOP-16 | 1:8, Multiplexer |
| SGM6516 | 16×8 | 4.5~13.2 | 45 | I/O | 40 |
| 65 | 25 | -47 |
| LQFP-10×10-44L | 16×8, Passive |
| SGM65231 | SPST×8 | 2.3~3.6 | 500 | I/O | 4.5 |
| 17.2 | 13.5 |
|
| TQFN-4.5×3.5-20L,TSSOP-20 | 8-Bit SPST, Low Voltage, High Bandwidth Bus Switch |
| SGM65232 | (1:2)×32 | 3.3~5 | 100 | I/O | 11 |
| 26 | 13 | -60 |
| LQFP-14×14-100L | High Speed, 32-Bit 2:1 Bus Multiplexer |
| SGM6533 | (1:3)×3 | 2.5~5.5 | 350 | I/O | 7 |
|
|
| -60 |
| TQFN-3×3-20L,TSSOP-20 | High Speed, 3-1:3 Multiplexer |
| SGM7220 | Type C | 2.7~5 |
| I/O , I2C |
|
|
|
|
|
| UTQFN-1.6×1.6-12L | USB Type-C Configuration, Channel Logic and Port Control |
| SGM7232 | (1:3)×2 | 2.7~4.3 | 380/400 | I/O | 4/9 |
| 18 | 7 | -90 |
| UTQFN-2.2×1.4-12L | High Speed, 2-1:3 Multiplexer |
| SGM7300A/B | 2:1 | 3.0~3.6 | 9000/12000 | I/O | 5 |
| 1.5 |
|
|
| TLGA-2.5×4.5-20L | 3.3V, Differential 2-Channel, 2:1 Multiplexer/Demultiplexer Switches |
Integrated circuits (ICs) serve as the foundation of modern electronics, offering small size, low power consumption, strong performance and high reliability. They are widely used in consumer electronics, industrial applications, communications, automotive electronics, medical equipment, and aerospace/defense systems.
Uchi Electronics provides high-performance analog and mixed-signal processing solutions for industrial automation, new energy, automotive, communications, computing, consumer electronics and medical equipment applications.
This solution demonstrates the application of integrated circuits in server systems . For assistance selecting the right product, please contact our technical support team.
